For AI agents: Materialize has an MCP server at /api/mcp and a plain-text guide to using it at /llms.txt. Read /llms.txt first. It covers uploading a model, checking it will print, choosing a material, getting a quote and ordering.

Print
Material
ULTEM 1010

ULTEM 1010

Engineering Plastics
Chemical resistantFunctionalHeat resistantStrong

ULTEM 1010 is one of the strongest FDM thermoplastics. Possessing high heat resistance and thermal stability, it's able to withstand autoclave operations associated with sterilization and composite fabrication tooling. ULTEM 1010 offers the highest tensile strength and the highest chemical and thermal resistance of any FDM thermoplastic.

Print with ULTEM 1010
Mechanical Properties
Tensile strength73–90 MPa
Tensile modulus2500–3427 MPa
Elongation3–3.3 %
Flexural strength110–144 MPa
Flexural modulus2510–3197 MPa
Density1.275 g/cm³
Thermal
Heat deflection at 66 PSI206–216 °C
Heat deflection at 264 PSI211–213 °C
Print Constraints

Maximum build volume

914 × 610 × 914 mm

Min wall thickness1 mm
Min detail size0.8 mm
Default layer height0.2 mm
Default infill20%
Min embossing0.8 mm
Min engraving0.8 mm
Accuracy± 0.3 mm
Warping riskOver_140_mm
Interlocking partsNot supported

Available finishes

Each finish can be combined with the available colors at checkout.

Standard

Standard

1 color

The standard (as-printed) finish on FDM parts shows the natural texture of layer-by-layer printing. The visibility of the layer lines depends on part geometry and orientation, plus light marks where support material was removed.

Sanded

Sanded

1 color

The sanded finish on FDM parts reduces the visibility of layer lines compared to the standard finish, though some surface texture generally remains. How much smoothness is achieved can vary depending on the material.

All materials