SLS Nylon PA11 Carbon Fiber

Composites

Impact resistantChemical resistantStrongFunctional

PA11-CF is a very rigid material thanks to its carbon fiber reinforcement, which makes it a perfect option for applications where rigidity really matters. It is also the perfect choice for lightweight designs without compromising a part's functionality, which can be interesting to manufacture, for example, some motorsport parts.

Print with SLS Nylon PA11 Carbon Fiber

Mechanical Properties

Tensile strength65–85 MPa

Tensile modulus5000–6500 MPa

Elongation3–7 %

Flexural strength90–120 MPa

Flexural modulus5000–6000 MPa

Density1.09 g/cm³

Thermal

Heat deflection at 66 PSI170–190 °C

Heat deflection at 264 PSI151 °C

Print Constraints

Maximum build volume

350 × 350 × 360 mm

Default layer height0.15 mm

Default infill100%

Min embossing0.3 mm

Min engraving0.3 mm

Accuracy± 0.3 mm

Warping riskModerate

Interlocking partsSupported

Available finishes

Each finish can be combined with the available colors at checkout.

Standard

1 color

SLS Nylon infused with Carbon fiber results in slightly coarse surface.

Polished

1 color

SLS nylon PA 11 infused with carbon fiber and with a polished smooth surface.

Vapor Smoothed

1 color

Vapor smoothing uses a vaporized solvent to partially melt and blend the outer layer of a 3D print, significantly reducing visible layer lines to create a more uniform, sealed finish.

All materials

SLS Nylon PA11 Carbon Fiber

Composites

Impact resistantChemical resistantStrongFunctional

Print with SLS Nylon PA11 Carbon Fiber

Mechanical Properties

Tensile strength65–85 MPa

Tensile modulus5000–6500 MPa

Elongation3–7 %

Flexural strength90–120 MPa

Flexural modulus5000–6000 MPa

Density1.09 g/cm³

Thermal

Heat deflection at 66 PSI170–190 °C

Heat deflection at 264 PSI151 °C

Print Constraints

Maximum build volume

350 × 350 × 360 mm

Default layer height0.15 mm

Default infill100%

Min embossing0.3 mm

Min engraving0.3 mm

Accuracy± 0.3 mm

Warping riskModerate

Interlocking partsSupported

Available finishes

Each finish can be combined with the available colors at checkout.

Standard

1 color

SLS Nylon infused with Carbon fiber results in slightly coarse surface.

Polished

1 color

SLS nylon PA 11 infused with carbon fiber and with a polished smooth surface.

Vapor Smoothed

1 color

Vapor smoothing uses a vaporized solvent to partially melt and blend the outer layer of a 3D print, significantly reducing visible layer lines to create a more uniform, sealed finish.

All materials