SLS/MJF Polypropylene

Engineering Plastics

DurableFunctionalWater resistant

Polypropylene (PP) is a rigid, lightweight material good for packaging and storage purposes. The second most widely used plastic in the world, 3D printed PP has properties comparable to injection-molded PP. It is tough, fatigue-resistant, and durable.

Print with SLS/MJF Polypropylene

Mechanical Properties

Tensile strength21.4–29 MPa

Tensile modulus907–1600 MPa

Elongation14–20 %

Flexural strength22.8 MPa

Flexural modulus698 MPa

Density0.89 g/cm³

Print Constraints

Maximum build volume

450 × 450 × 450 mm

Default layer height0.1 mm

Default infill100%

Min embossing1.5 mm

Min engraving1.5 mm

Accuracy± 0.3 mm

Warping riskHigh

Interlocking partsSupported

Available finishes

Each finish can be combined with the available colors at checkout.

Standard

2 colors

Raw and granular surface finish with a soft touch.

Electroplated

8 colors

Electroplating is a process where a thin layer of metal is applied to plastic surfaces to enhance durability, corrosion resistance, and electrical conductivity.

All materials