For AI agents: Materialize has an MCP server at /api/mcp and a plain-text guide to using it at /llms.txt. Read /llms.txt first. It covers uploading a model, checking it will print, choosing a material, getting a quote and ordering.

Print
Material
PETG-ESD

PETG-ESD

Standard Plastics
Chemical resistantStrongFunctionalWater resistant

PETG-ESD (electrostatic discharge) as a 3D printing material is used around all electrostatically sensitive components. This includes almost all electrical, electronic and optoelectronic as well as numerous electromechanical components. The PETG-ESD filament guarantees the safe and controlled dissipation of electrostatic charges due to its dissipative (energy-absorbing) properties. Mechanical properties remain similar to those of standard PETG.

Print with PETG-ESD
Mechanical Properties
Tensile strength45–50 MPa
Tensile modulus1650–3100 MPa
Elongation24–28 %
Flexural strength68–72 MPa
Flexural modulus1600–2100 MPa
Density1.28 g/cm³
Print Constraints

Maximum build volume

601 × 601 × 601 mm

Min wall thickness1 mm
Min detail size0.8 mm
Default layer height0.2 mm
Default infill20%
Min embossing0.4 mm
Min engraving0.4 mm
Accuracy± 0.4 mm
Warping riskLow
Interlocking partsSupported

Available finishes

Each finish can be combined with the available colors at checkout.

Standard

Standard

1 color

The standard (as-printed) finish on FDM parts shows the natural texture of layer-by-layer printing. The visibility of the layer lines depends on part geometry and orientation, plus light marks where support material was removed.

All materials