For AI agents: Materialize has an MCP server at /api/mcp and a plain-text guide to using it at /llms.txt. Read /llms.txt first. It covers uploading a model, checking it will print, choosing a material, getting a quote and ordering.

Print
Material
Figure 4® HI TEMP 300-AMB

Figure 4® HI TEMP 300-AMB

Engineering Plastics
Heat resistantDurableStrongFunctional

Figure 4® HI TEMP 300-AMB is a rigid, translucent amber resin with a heat deflection temperature above 300 °C at both low (0.455 MPa) and high (1.82 MPa) stress, and it doesn’t need a secondary thermal post-cure. It is stiff and fairly strong but brittle. The amber translucency lets users see internal features and fluid flow. Figure 4® HI TEMP 300-AMB is well suited to testing high-temperature components such as HVAC and motor parts, and to low-pressure molds for foams, rubbers, and silicone.

Print with Figure 4® HI TEMP 300-AMB
Mechanical Properties
Tensile strength68–81 MPa
Tensile modulus3800–4200 MPa
Elongation1.9–2.6 %
Flexural strength85–140 MPa
Flexural modulus4000–4260 MPa
Density1.3 g/cm³
Print Constraints

Maximum build volume

330 × 185 × 375 mm

Min wall thickness0.6 mm
Min detail size0.25 mm
Default layer height0.1 mm
Default infill100%
Min embossing0.5 mm
Min engraving0.5 mm
Accuracy± 0.1 mm
Warping riskLow
Interlocking partsSupported

Available finishes

Each finish can be combined with the available colors at checkout.

Standard

Standard

1 color

Standard Figure 4® HI TEMP 300-AMB parts are translucent amber with fine layer detail and small marks where supports were removed. The resin is extremely heat resistant but rigid and brittle.

All materials