For AI agents: Materialize has an MCP server at /api/mcp and a plain-text guide to using it at /llms.txt. Read /llms.txt first. It covers uploading a model, checking it will print, choosing a material, getting a quote and ordering.

Print
Material
FDM Polypropylene

FDM Polypropylene

Engineering Plastics
Impact resistantDurableFunctionalWater resistant

Polypropylene (PP) is the second most widely used plastic in the world. It is a rigid and lightweight material good for packaging and storage purposes. Being tough, fatigue-resistant, and durable, this material is suited for semi-rigid, functional prototypes in a large range of applications with snap-fit assemblies or living hinges.

Print with FDM Polypropylene
Mechanical Properties
Tensile strength9–30 MPa
Tensile modulus220–1500 MPa
Elongation118–600 %
Flexural strength22–64 MPa
Flexural modulus390–2500 MPa
Density0.9 g/cm³
Print Constraints

Maximum build volume

601 × 601 × 601 mm

Min wall thickness1 mm
Min detail size0.8 mm
Default layer height0.2 mm
Default infill20%
Min embossing0.5 mm
Min engraving0.5 mm
Accuracy± 0.2 mm
Warping riskHigh
Interlocking partsSupported

Available finishes

Each finish can be combined with the available colors at checkout.

Standard

Standard

12 colors

The standard (as-printed) finish on FDM parts shows the natural texture of layer-by-layer printing. The visibility of the layer lines depends on part geometry and orientation, plus light marks where support material was removed.

Sanded

Sanded

12 colors

The sanded finish on FDM parts reduces the visibility of layer lines compared to the standard finish, though some surface texture generally remains. How much smoothness is achieved can vary depending on the material.

All materials