For AI agents: Materialize has an MCP server at /api/mcp and a plain-text guide to using it at /llms.txt. Read /llms.txt first. It covers uploading a model, checking it will print, choosing a material, getting a quote and ordering.

Print
Material
Carbon Fiber Polycarbonate

Carbon Fiber Polycarbonate

Composites
Wear resistantStrongUV resistantChemical resistant

Carbon fiber polycarbonate (PC-CF) reinforces polycarbonate with chopped carbon fiber, meaningfully increasing stiffness, heat resistance, and dimensional stability over standard PC. PC-CF suits jigs, fixtures, structural brackets, drone frames, and automotive components where rigidity and heat resistance matter most.

Print with Carbon Fiber Polycarbonate
Mechanical Properties
Tensile strength70–87 MPa
Tensile modulus6200–9500 MPa
Elongation2–10 %
Flexural strength85–92 MPa
Flexural modulus5890–9000 MPa
Density1.36 g/cm³
Thermal
Heat deflection at 66 PSI113–150 °C
Print Constraints

Maximum build volume

1120 × 720 × 620 mm

Min wall thickness1 mm
Min detail size0.8 mm
Default layer height0.2 mm
Default infill20%
Min embossing0.4 mm
Min engraving0.4 mm
Accuracy± 0.3 mm
Warping riskOver_140_mm
Interlocking partsSupported

Available finishes

Each finish can be combined with the available colors at checkout.

Standard

Standard

1 color

The standard (as-printed) finish on FDM parts shows the natural texture of layer-by-layer printing. The visibility of the layer lines depends on part geometry and orientation, plus light marks where support material was removed.

Sanded

Sanded

1 color

The sanded finish on FDM parts reduces the visibility of layer lines compared to the standard finish, though some surface texture generally remains. How much smoothness is achieved can vary depending on the material.

All materials