For AI agents: Materialize has an MCP server at /api/mcp and a plain-text guide to using it at /llms.txt. Read /llms.txt first. It covers uploading a model, checking it will print, choosing a material, getting a quote and ordering.

Print
Material
Carbon Fiber PEEK

Carbon Fiber PEEK

Composites
Chemical resistantHeat resistantImpact resistantFlame retardant

Carbon-reinforced PEEK contains short carbon fibers, which make the material even stiffer and stronger than normal PEEK. Thermal properties remain similar to normal PEEK.

Print with Carbon Fiber PEEK
Mechanical Properties
Tensile strength96–105 MPa
Tensile modulus8000–8200 MPa
Elongation3–6.9 %
Flexural strength136–140 MPa
Flexural modulus3063–8300 MPa
Density1.32 g/cm³
Print Constraints

Maximum build volume

350 × 350 × 500 mm

Min wall thickness1 mm
Min detail size0.8 mm
Default layer height0.2 mm
Default infill20%
Min embossing0.8 mm
Min engraving0.8 mm
Accuracy± 0.4 mm
Warping riskOver_140_mm
Interlocking partsNot supported

Available finishes

Each finish can be combined with the available colors at checkout.

Standard

Standard

1 color

The standard (as-printed) finish on FDM parts shows the natural texture of layer-by-layer printing. The visibility of the layer lines depends on part geometry and orientation, plus light marks where support material was removed.

Sanded

Sanded

1 color

The sanded finish on FDM parts reduces the visibility of layer lines compared to the standard finish, though some surface texture generally remains. How much smoothness is achieved can vary depending on the material.

All materials